Lite Cold Foil Machine
Lite Cold Foil Machine
Introduction
The equipment can connect with semi automatic screen printing machine or full-automatic screen printing machine to complete the cold foiling process. This equipment is small and delicate, and can complete the cold foil process. The paper needs to be UV cured by another UV machine before it goes into this machine.
(Cold Foil Effect)
Equipment Parameters
| Model | QC-106-LT | QC-130-LT | QC-145-LT |
| Max sheet size | 1100X780mm | 1320X880mm | 1500x1050mm |
| Min sheet size | 540x380mm | 540x380mm | 540x380mm |
| Max print size | 1080x780mm | 1300x820mm | 1450x1050mm |
| Paper thickness |
90-450 g/㎡ cold foil:157-450 g/㎡ |
90-450 g/㎡ cold foil:157-450 g/㎡ |
90-450 g/㎡ cold foil:157-450 g/㎡ |
| Max diameter of film roll | 250mm | 250mm | 250mm |
| Max width of film roll | 1050mm | 1300mm | 1450mm |
| Max delivery speed |
500-4000sheet/h Cold foil: 500-1500sheet/h |
500-3800sheet/h Cold foil: 500-1500sheet/h |
500-3200sheet/h Cold foil: 500-1200sheet/h |
| Total power of equipment | 13KW | 15KW | 17KW |
| Total weight of equipment | ≈1.2T | ≈1.4T | ≈1.6T |
| Equipment size (LWH) | 2100X2050X1500mm | 2100X2250X1500mm | 2100X2450X1500mm |
Main Advantages
A.Paper suction and bridge:
Equipped with negative pressure conveyor platform, the height can be adjusted up and down.A variety of heights can match front-end equipment
B.Front gauge:
By setting the front gauge through photoelectric and touch screen, the tilted material can be aligned and enter the cold stamping mechanism in a flat position
C.High temperature resistant silicon pressure roller:
Adopting oil heating method, the roller temperature is uniform with low deformation and longer service life
D.Intelligent human-machine interaction interface:
Adopting industrial touch screen, easy to operate and set up
E.Remote upgrade and troubleshooting:
Adopting German Siemens PLC for centralized control, with faster and stable response. Equipped with a network debugging module, it can remotely diagnose problems and modify programs.
F.Pressure boosting system:
The equipment adopts a boosting cylinder for pressure regulation, making the pressure more stable.
G.Jump foil setting:
It can be set through photoelectric and PLC systems to complete skip steps between paper to paper and skip steps for the position of gold inside one piece of paper.
H.Material usage:
High rigidity precision wall panel: processed with 25mm steel plate, ensuring more stable equipment operation.
I.Optional foil stamping:
The machine is compatible with 1-inch core or 3-inch core foil (special cold stamping paper and some hot stamping paper can be used)
J.Adopting a safety clamp:
Easy installation with gilded paper, and safe operation of the inflatable shaft.
